AKG Performance Parts for BMW
BMW Rear Shock Mounts Aluminum, Poly 10mm – E30, E36, E46, Z3, Z4
These BMW E30, E36, E46, Z3, Z4 Aluminum Rear Shock Mounts (10mm) with Poly Bushings are true, performance rear shock mounts that virtually eliminate the deflection that occurs with the factory shock mounts. The stock rubber upper shock mounts deflect under load – negatively affecting the rear shock damping, especially with a modified suspension and increased shock valving. Upgrading your stock rear shock mounts to our BMW E30, E36, E46, Z3, Z4 aluminum rear shock mounts with poly bushings will drastically reduce this movement, helping to keep the rear shock in place so that it may operate properly. These may also be paired with our BMW Rear Shock Mount Reinforcements.
IMPORTANT: The 10mm/12mm sizing refers to the inner diameter of the shock mount sleeve. The size of your shock dictates which size you need (OEM is 10mm; aftermarket shocks vary and must be measured). If you aren’t sure which size you need, measure the OD of the top threaded portion of the shock, or check with the manufacturer.
Made of solid CNC’d 7075-T6 aluminum with U.S. Military Spec 10mm polyurethane bushings (replaceable). Hard anodized for corrosion resistance. Set of two shock mounts with heavy-duty stainless hardware.
Original AKG design. Learn more about Genuine AKG Parts.
Recommended Use: TRACK / PERFORMANCE
NVH Increase: Low
Designed for the following models:
BMW E30 (1986-1991) 318, 323, 325, M3
BMW E36 (1992-1999) 318, 323, 325, 328, M3
BMW E46 (1999-2006) 323, 325, 328, 330, M3
BMW Z3 (1996-2003) 2.0, 2.3, 2.5, 3.0, M
BMW Z4 (2003-2008) 2.5, 3.0, M
Made in USA
Out of Stock